The production and processing technology of the mold company is facing a severe situation


Release Time:

2020-07-06

The development trend of isolation pier molds is rapid. Many traffic law enforcement projects use road piles, and plastic molds are indispensable for the production of road piles. Therefore, the construction team's requirements for plastic molds are increasing. Plastic molds generally have two kinds of raw materials to choose from, one is polypropylene (project pp), and the other is ABS. The first material is too soft in texture and its color is white.

The development of isolation pier molds is rapid. Many traffic law enforcement projects use road piles, and plastic molds are indispensable for the production of road piles. Therefore, the construction team's requirements for plastic molds are increasing. Plastic molds generally have two kinds of raw materials to choose from, one is polypropylene (project pp), and the other is ABS. The first material is too soft in texture and its color is white. The second raw material is hard and the color is dark yellow.

If the construction is heavy, you can also choose steel molds, which are easy to disassemble and assemble. The concrete isolation pier mold is to order steel molds according to certain specifications and shapes. According to the high-temperature molten slurry and refrigeration judgment, the manufactured cement components have certain shape requirements. This is the meaning of prefabricated components. Before, everyone was based on The wood is put together, then grouted, and then disassembled after drying. However, the surface produced by this kind of production is not smooth and has air holes. Later, I started to study the mold. At the beginning, I had some doubts about the raw materials. I considered the choice of plastic comprehensively. , because plastic is renewable and can be reused continuously, it has become a high-speed isolation pier mold that has been used all the time.

The most important thing to pay attention to in the case of injection molding is that the isolation pier mold is composed of a movable mold and a fixed mold. The movable mold is installed on the moving template of the injection molding machine, and the fixed mold is installed on the fixed template of the injection molding machine. superior. During injection molding, the movable mold and the fixed mold are closed to form the pouring system and the die. When the mold is ejected, the movable mold and the fixed mold are separated to facilitate the removal of plastic products. Injection molding molds are divided into thermosetting plastic molds and thermosetting plastic molds according to the forming characteristics; according to the forming process, they are divided into transfer molds, injection molds, casting molds, thermoforming molds, compression molds (press molds), injection molds, etc. Among them, the compression mold can be divided into three types: overflow type, semi-overflow type and non-overflow type according to the overflow method, and the injection mold can be divided into two types: cold runner mold and hot runner system mold according to the loading and unloading method. The handling method can be divided into two types: portable and mobile.

The real hot season of plastic isolation pier mold products for municipal engineering in our country will come soon, because the temperature is getting warmer, and a new order link has started for various municipal road projects , this ordering link requires a variety of general-purpose plastic mold products and some customized isolation pier mold products, which is a very important link for many large and medium-sized municipal road engineering companies. It is necessary to customize a large number of mold products in a relatively short period of time, which is a very severe test for whether the entire municipal road project can be started normally.

The manufacturing data of plastic isolation pier mold products must be well mastered in important links before they can be manufactured. Therefore, in the case of manufacturing plastic mold products for engineering projects, we must effectively master the requirements The main parameters of customized engineering project plastic mold products in various fields must be made with reference to engineering drawings. For some general concrete isolation pier mold products, many plastic mold manufacturers have steel molds with trucks, which can be produced in large quantities at a very fast rate, but for this kind of customized plastic mold products, If these customized plastic mold products are to be produced in large quantities, it is necessary to start from the design of this model, and then carry out a new design work on this mold product,

Then there is a whole process of opening steel mold products for this customized isolation pier mold product, and then a mass production of this mold product is carried out. After the mold product is manufactured, it will be used in the application In the case of actual production, a new attempt will be made on the mold release of this mold product. Whether the mold can be successfully released is also a technical test for many mold manufacturers, so The price is higher.